CNC Turret Lathe: MB35/38/50-III
Fixed headstock machine
8-faces x 2 turrets are performed powerful cutting of complicated workpieces
- Machining time is shortened 30 to 50% compared with our conventional machine.
- Max. spindle speed 6,000min-1, Max.spindle cutting torque 35Nm (MB38)
- No idle time for tool selection by stand-by function of two turrets to prepare next indexing,
simultaneous ID and OD or balanced OD machining possible. - Idle time (chip to chip) is 1.5sec. (T1 turret) in case same turret index machining.
| Standard Specification | MB35 |
MB50S |
MB50SY |
|---|---|---|---|
| Max. machinable dia. | φ35mm | φ50mm | |
| Main spindle speed | 60～6,000min-1 | 60～4,500min-1 | |
| Back spindle speed | ー | 60～4,500min-1 | |
| Total number of tools | 8-face turret×2 | ||
| Rapid traverse rate | 20m/min | X1,Z1,Z2,Z3:20m/min | |
| Main spindle motor | 3.7/5.5kW | 5.5/7.5kW | |
| Width×Depth×Height | 2,110×1,645×1,700mm | 3,480×2,035×1,750mm | |
| Net weight | 3,500kg | 5,200kg | |
| Standard Specification | MB38Y |
MB38S |
MB38SY |
|---|---|---|---|
| Max. machinable dia. | φ38mm | ||
| Main spindle speed | 60～6,000min-1 | ||
| Back spindle speed | ー | 60～6,000min-1 | |
| Total number of tools | 8-face turret×2 | ||
| Rapid traverse rate | X1,Z1,Z2,Z3：20m/min X2：12m/min （Y：10m/min） | ||
| Main spindle motor | 5.5/7.5kW | ||
| Width×Depth×Height | 3,090×2,035×1,750mm | 3,480×2,035×1,760mm | |
| Net weight | 4,000kg | 6,000kg | |